FANUC preventive maintenance
Lubrication, gearbox grease/oil changes, battery replacement, axis mastering and safety inspection based on operating hours and FANUC specifications.
Brands
FANUC Robot Maintenance
Independent technical service for the entire FANUC range — from R-J2 to R-30iB Plus controllers. Maintenance, spare parts and integration with 24h response.
- ROBOGUIDE & iRVision
- 24h response time
- 100% independent
The full FANUC range we maintain
We service FANUC robots of any generation and condition, with no brand ties. We know the FANUC ecosystem end to end: controllers, programming software and every robot format.
| Controller | Generation | Software | Support |
|---|---|---|---|
| R-J2 | 1992–2000 | TP / KAREL | Covered |
| R-J3 / R-J3iB | 2000–2008 | TP / KAREL | Covered |
| R-30iA | 2008–2014 | TP / KAREL | Covered |
| R-30iB | 2014–2022 | TP / KAREL | Covered |
| R-30iB Plus | 2016 → | TP / KAREL | Covered |
Robot families we maintain
- LR Mate 200Compact & assembly
- M-10 / M-20General purpose
- M-710Medium payload
- R-2000High payload
- M-2000iAUltra-high payload
- M-1 / M-2 / M-3Delta — picking & feeding
- CR seriesCollaborative
Our services for your FANUC fleet
FANUC corrective maintenance
Root cause diagnosis of controller alarms, axis (SRVO) faults, communication issues and power supply failures. Repair with warranty and full documentation.
FANUC spare parts
New and reconditioned parts: axis boards and servo amplifiers, power supplies, motors, gearboxes, batteries, iPendant consoles and cabling.
FANUC integration & programming
Design and commissioning of complete FANUC cells, TP/KAREL programming, ROBOGUIDE simulation and integration of iRVision and peripherals.
Frequently asked questions about FANUC robots
We work with the entire range: from the old R-J2 and R-J3 to R-30iA, R-30iB and the current R-30iB Plus. We don't rule out robots by age — many keep producing perfectly with the right maintenance.
Yes. We simulate and program complete cells in ROBOGUIDE and integrate iRVision vision systems, reducing your line's downtime during integration.
We supply both original FANUC parts and certified reconditioned ones. Reconditioned parts usually let production resume immediately while we source the original, at a lower cost.
No, we are an independent technical service. We work to FANUC's official technical specifications, using new or certified reconditioned parts of equivalent quality, at more competitive rates and with no manufacturer sales pressure.
Diagnosis is done on the first visit. If the part is available, the repair is usually completed within 24-72h. For contract clients we keep critical-part stock reserved to minimise line downtime.
We are also specialists in ABB robot maintenance and KUKA robot maintenance.
Got FANUC robots to maintain?
Tell us which models you have and we'll prepare a tailored maintenance plan. First consultation with no commitment.
Request a free diagnosis